Difference between revisions of "Main Page"
m (checked using gbxcartrw, M36L0R806 is 32mb rom) |
|||
(43 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
− | == GameBoy Flash Carts (By vendor) == | + | == GameBoy Flash Carts (By vendor, current) == |
''' BennVenn ''' | ''' BennVenn ''' | ||
− | • BennVenn | + | • BennVenn ElCheapoSD v2.2 |
− | |||
− | + | ''' Catskull ''' | |
− | • | + | • Catskull 32KB [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] |
− | |||
− | + | ''' Dillon1337 ''' | |
+ | • [[Homebrew Gameboy Cartridge|Homebrew Gameboy Cartridge (512KB MBC1) ]] | ||
− | |||
− | + | ''' EMS ''' | |
− | • | + | • GB USB 64M Smart Card [[File:JOEY-JOEBAGS.jpg|20px|Flashable with Joey-Joebags]] [[File:Altane.jpg|20px|Flashable with Altane]] |
− | ''' | + | ''' EZ-Flash ''' |
− | • | + | • EZ-Flash Junior |
Line 34: | Line 32: | ||
• GB-CART32K-A (32KB) | • GB-CART32K-A (32KB) | ||
− | • GB- | + | • GB-CART256K-A (256KB) |
Line 41: | Line 39: | ||
• [[insideGadgets 32KB|insideGadgets 32KB]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | • [[insideGadgets 32KB|insideGadgets 32KB]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
− | • [[insideGadgets | + | • insideGadgets 32KBx15 [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] |
+ | |||
+ | • insideGadgets 32KB FROM [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
+ | |||
+ | • insideGadgets 32KB, 4KB FRAM [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
+ | |||
+ | • insideGadgets 512KB Logic [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
+ | |||
+ | • insideGadgets 1MB, 128KB SRAM Ultra Low Power [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
+ | |||
+ | • insideGadgets 1MB, 128KB SRAM [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
− | • | + | • insideGadgets 4MB, 128KB SRAM Low Power [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] |
− | • | + | • insideGadgets 4MB, 128KB FRAM Low Power [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] |
• [[insideGadgets 64MB, 128KB SRAM|insideGadgets 64MB, 128KB SRAM]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | • [[insideGadgets 64MB, 128KB SRAM|insideGadgets 64MB, 128KB SRAM]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
Line 57: | Line 65: | ||
''' Kitsch-Bent ''' | ''' Kitsch-Bent ''' | ||
− | • KitschKart Multicart 2MB ( | + | • [[KitschKart Multicart (BennVenn)|KitschKart Multicart (BennVenn) 2MB]] [[File:JOEY-JOEBAGS.jpg|20px|Flashable with Joey-Joebags]] |
+ | |||
+ | • [[kk_gb_256x16_plcc cartridge|kk_gb_256x16_plcc cartridge (32KB x 16 slots)]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
Line 68: | Line 78: | ||
• MBC30 4MB Flash Cart (MBM29F033C) [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | • MBC30 4MB Flash Cart (MBM29F033C) [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
+ | |||
+ | |||
+ | '''RetroStage''' | ||
+ | |||
+ | • GameBoy Blaster 4MB ROM, 32KB FRAM | ||
+ | |||
+ | • GameBoy Blaster 8MB ROM, 32KB FRAM | ||
+ | |||
+ | • GameBoy Blaster 1MB ROM, 128KB SRAM | ||
+ | |||
+ | |||
+ | ''' ? ''' | ||
+ | |||
+ | • Jack DIY | ||
+ | |||
+ | • [[Flash BOY 4MB MBC5 Cart|Flash BOY 4MB MBC5 Cart]] (HASL contacts, 3.3V Flash without level shifters, not recommended!) | ||
+ | |||
+ | |||
+ | |||
+ | == GameBoy Flash Carts (By vendor, Discontinued) == | ||
+ | |||
+ | ''' BennVenn ''' | ||
+ | |||
+ | • BennVenn 256M (32MB) [[File:JOEY-JOEBAGS.jpg|20px|Flashable with Joey-Joebags]] | ||
+ | |||
+ | • BennVenn Charlie 802 2MB / 4MB / 8MB, FRAM [[File:JOEY-JOEBAGS.jpg|20px|Flashable with Joey-Joebags]] | ||
+ | |||
+ | • BennVenn ElCheapoSD V1.5/6 | ||
+ | |||
+ | • BennVenn ElCheapoSD V1.95 | ||
+ | |||
+ | • BennVenn USB LSDJ Cart v1.1 | ||
+ | |||
+ | |||
+ | ''' Catskull ''' | ||
+ | |||
+ | • Catskull 2MB MBC5 [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] [[File:Altane.jpg|20px|Flashable with Altane]] [[File:J.Rodrigo Cart Flasher.JPG|20px|Flashable with J.Rodrigo Cart Flasher]] | ||
+ | |||
+ | |||
+ | '''insideGadgets ''' | ||
+ | |||
+ | • [[insideGadgets 2MB, 128KB SRAM|insideGadgets 2MB, 128KB SRAM]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] [[File:Altane.jpg|20px|Flashable with Altane]] [[File:J.Rodrigo Cart Flasher.JPG|20px|Flashable with J.Rodrigo Cart Flasher]] | ||
+ | |||
+ | • [[insideGadgets 2MB, 32KB FRAM|insideGadgets 2MB, 32KB FRAM]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] [[File:Altane.jpg|20px|Flashable with Altane]] [[File:J.Rodrigo Cart Flasher.JPG|20px|Flashable with J.Rodrigo Cart Flasher]] | ||
''' Nintendo ''' | ''' Nintendo ''' | ||
− | • [[Nintendo 1MB Power Cart|Nintendo 1MB Power Cart]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | + | • [[Nintendo 1MB Power Cart|Nintendo 1MB Power Cart]] [[File:JOEY-JOEBAGS.jpg|20px|Flashable with Joey-Joebags]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] |
''' Professor Abrasive ''' | ''' Professor Abrasive ''' | ||
− | • Professor Abrasive Drag'N'Derp 3MB, 128KB FRAM | + | • Professor Abrasive Drag'N'Derp 3MB, 128KB FRAM [[File:Altane.jpg|20px|Flashable with Altane]] |
Line 84: | Line 138: | ||
• FIGHTERCART [[File:Altane.jpg|20px|Flashable with Altane]] | • FIGHTERCART [[File:Altane.jpg|20px|Flashable with Altane]] | ||
− | • [[GB Smart 16M|GB Smart 16M | + | • [[GB Smart 16M|GB Smart 16M]] [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] |
+ | |||
+ | • GB Smart 32M | ||
− | |||
− | + | == GameBoy Clone/Repo Flash Carts == | |
+ | Some of these clone/repo carts don't support the MBC1 mapper properly, so some MBC1 games may work but others might not. You can manually patch the game to change it to be MBC5. Here is a listing of games and their MBC types: https://ladecadence.net/trastero/listado%20juegos%20gameboy.html | ||
− | + | [[Clone_and_Repo_Cart_Problems|Check out the potential problems with some of these clone/repo carts]] | |
− | + | Can't find your cart in this list? Try an option close to it and let us know if it works! | |
{| class="wikitable" | {| class="wikitable" | ||
Line 104: | Line 160: | ||
|'''Save Type''' | |'''Save Type''' | ||
|'''Battery installed?''' | |'''Battery installed?''' | ||
+ | |'''Notes''' | ||
+ | |- | ||
+ | |[[File:AM29LV160_EPM3032A.jpg|80px]] | ||
+ | |AM29LV160 | ||
+ | | | ||
+ | |512KB | ||
+ | |Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |Original game is 512KB, it seems locked to that, has MBC1 support. CPLD programming pins exposed. 0.3uA used for SRAM data retention. | ||
+ | |- | ||
+ | |[[File:29LV320TE_EPM3032A.jpg|80px]] | ||
+ | |29LV320 | ||
+ | | | ||
+ | |1MB | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |Original game is 1MB, may be locked to that?. CPLD programming pins exposed. | ||
|- | |- | ||
|[[File:ES29LV160.jpg|80px]] | |[[File:ES29LV160.jpg|80px]] | ||
Line 112: | Line 187: | ||
|SRAM | |SRAM | ||
| | | | ||
+ | |Recommended 3.3V to erase/program. After installing a battery, change solder bridge from N to Y. | ||
|- | |- | ||
|[[File:16BIT 0883 32M.jpg|80px]] | |[[File:16BIT 0883 32M.jpg|80px]] | ||
Line 120: | Line 196: | ||
|SRAM | |SRAM | ||
|Yes | |Yes | ||
+ | |Recommended 3.3V to erase/program. After installing a battery, change solder bridge from N to Y. | ||
|- | |- | ||
|[[File:BV5.jpg|80px]] | |[[File:BV5.jpg|80px]] | ||
Line 128: | Line 205: | ||
|SRAM | |SRAM | ||
|Yes | |Yes | ||
+ | | | ||
|- | |- | ||
|[[File:SD007-BV5.jpg|80px]] | |[[File:SD007-BV5.jpg|80px]] | ||
Line 135: | Line 213: | ||
|Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | |Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
|SRAM | |SRAM | ||
+ | | | ||
| | | | ||
|- | |- | ||
Line 143: | Line 222: | ||
|Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | |Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
|SRAM | |SRAM | ||
+ | | | ||
| | | | ||
|- | |- | ||
Line 152: | Line 232: | ||
|SRAM | |SRAM | ||
|Yes | |Yes | ||
+ | |Recommended 3.3V to erase/program. | ||
|- | |- | ||
| | | | ||
Line 160: | Line 241: | ||
|SRAM | |SRAM | ||
| | | | ||
+ | |Recommended 3.3V to erase/program. | ||
|- | |- | ||
|[[File:29LV160CTTC.jpg|80px]] | |[[File:29LV160CTTC.jpg|80px]] | ||
Line 168: | Line 250: | ||
|SRAM | |SRAM | ||
|Yes | |Yes | ||
+ | |Recommended 3.3V to erase/program. | ||
|- | |- | ||
|[[File:GB-M900.jpg|80px]] | |[[File:GB-M900.jpg|80px]] | ||
− | + | |29LV160TE | |
|GB-M900 | |GB-M900 | ||
|2MB | |2MB | ||
Line 176: | Line 259: | ||
|SRAM | |SRAM | ||
|Yes | |Yes | ||
+ | |Recommended 3.3V to erase/program. | ||
|- | |- | ||
− | |[[File:GB- | + | |[[File:GB-M900.jpg|80px]] |
− | |[[ | + | |29LV160TE |
− | |GB- | + | |GB-M900 |
+ | |2MB | ||
+ | |Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |Recommended 3.3V to erase/program. | ||
+ | |- | ||
+ | |[[File:S29AL016M90.jpg|80px]] | ||
+ | |S29AL016M90 | ||
+ | |GB-M900 | ||
|2MB | |2MB | ||
|Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | |Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
|SRAM | |SRAM | ||
| | | | ||
+ | |Recommended 3.3V to erase/program. | ||
|- | |- | ||
|[[File:S29GL016A90T.jpg|80px]] | |[[File:S29GL016A90T.jpg|80px]] | ||
− | | | + | |S29GL016A90T |
|GD-TSOP-OPI | |GD-TSOP-OPI | ||
|2MB | |2MB | ||
− | | | + | |Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] |
|SRAM | |SRAM | ||
| | | | ||
+ | |Recommended 3.3V to erase/program. | ||
|- | |- | ||
|[[File:29LV320_GB-M968.jpg|80px]] | |[[File:29LV320_GB-M968.jpg|80px]] | ||
− | + | |29LV320 | |
|GB-M968 | |GB-M968 | ||
|4MB? | |4MB? | ||
| | | | ||
|SRAM | |SRAM | ||
+ | | | ||
| | | | ||
|- | |- | ||
Line 208: | Line 304: | ||
|SRAM | |SRAM | ||
| | | | ||
+ | |Recommended 3.3V to erase/program. 19uA used for SRAM data retention, won't last long. | ||
+ | |- | ||
+ | |[[File:Sd007v2.jpg|80px]] | ||
+ | |[[SD007_48BALL-64M_V2|M29W160ET]] | ||
+ | |SD007_48BALL-64M_V2 | ||
+ | |4MB | ||
+ | |Yes [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |Recommended 3.3V to erase/program. | ||
|- | |- | ||
| | | | ||
Line 216: | Line 322: | ||
|SRAM | |SRAM | ||
| | | | ||
+ | |Recommended 3.3V to erase/program. | ||
|- | |- | ||
|[[File:GL032-1.jpg|80px]] | |[[File:GL032-1.jpg|80px]] | ||
Line 224: | Line 331: | ||
|SRAM | |SRAM | ||
| | | | ||
+ | |Recommended 3.3V to erase/program. | ||
|- | |- | ||
|[[File:SD008.jpg|80px]] | |[[File:SD008.jpg|80px]] | ||
Line 232: | Line 340: | ||
|SRAM | |SRAM | ||
|Yes | |Yes | ||
+ | |Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower. 4uA used for SRAM data retention. | ||
|- | |- | ||
| | | | ||
Line 240: | Line 349: | ||
|SRAM | |SRAM | ||
| | | | ||
+ | |Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower. | ||
|- | |- | ||
|[[File:20190613 173732-1.jpg|80px]] | |[[File:20190613 173732-1.jpg|80px]] | ||
Line 248: | Line 358: | ||
|SRAM | |SRAM | ||
|Yes | |Yes | ||
+ | |Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower. | ||
|} | |} | ||
− | ''' Clone carts (Older) ''' | + | ''' Clone/Repo carts (Older) ''' |
{| class="wikitable" | {| class="wikitable" | ||
Line 274: | Line 385: | ||
|- | |- | ||
|[[File:29LV004T-F.jpg|80px]] | |[[File:29LV004T-F.jpg|80px]] | ||
− | + | |29LV004T | |
|UC-32A06 | |UC-32A06 | ||
| | | | ||
Line 290: | Line 401: | ||
|SRAM | |SRAM | ||
|Yes | |Yes | ||
+ | |- | ||
+ | |[[File:D431000GW-12L.jpg|80px]] | ||
+ | |? | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |- | ||
+ | |[[File:Unknown_GB_Cart_1.jpg|80px]] | ||
+ | |? | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
|} | |} | ||
Line 296: | Line 425: | ||
GBA games can use 3 different save types - SRAM, Flash or EEPROM and some cartridges aren't able to support all of these types. | GBA games can use 3 different save types - SRAM, Flash or EEPROM and some cartridges aren't able to support all of these types. | ||
+ | |||
+ | [[How_to_Patch_GBA_Games_with_GBATA|Check out how to patch GBA games using GBATA]] | ||
Line 310: | Line 441: | ||
''' insideGadgets ''' | ''' insideGadgets ''' | ||
+ | |||
+ | • insideGadgets GBA 32MB, 256Kbit FRAM Save [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
+ | |||
+ | • insideGadgets GBA 32MB, 4Kbit/64Kbit EEPROM Save [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
• insideGadgets GBA 32MB, 512Kbit Flash Save [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | • insideGadgets GBA 32MB, 512Kbit Flash Save [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] | ||
Line 328: | Line 463: | ||
− | + | == Gameboy Advance Clone/Repo Carts == | |
+ | |||
+ | Most clone/repo carts only come with SRAM, sometimes without a battery. If your game saves to an EEPROM or Flash then it won’t work on unless you patch it to use SRAM, the GBATA program seems to work well for this as reported by some users. If the cart you have doesn’t have a spot for a battery, then you will need to patch that game to save back to the flash. [https://raw.githubusercontent.com/mamedev/mame/master/hash/gba.xml Check what save type your game uses here]. | ||
− | + | [[How_to_Patch_GBA_Games_with_GBATA|Check out how to patch GBA games using GBATA]] | |
+ | |||
+ | [[Clone_and_Repo_Cart_Problems|Check out the potential problems with some of these clone/repo carts]] | ||
{| class="wikitable" | {| class="wikitable" | ||
Line 352: | Line 491: | ||
|- | |- | ||
|[[File:BX2006_TSOPBGA_0106_2.jpg|80px]] | |[[File:BX2006_TSOPBGA_0106_2.jpg|80px]] | ||
− | | | + | |M29W640FB |
|BX2006 TSOPBGA 0106 | |BX2006 TSOPBGA 0106 | ||
|8MB | |8MB | ||
Line 367: | Line 506: | ||
| | | | ||
|SRAM | |SRAM | ||
+ | | | ||
+ | |- | ||
+ | |[[File:COB-15.jpg|80px]] | ||
+ | |? | ||
+ | |COB-15 SP | ||
+ | |8MB | ||
+ | |256L30B | ||
+ | | | ||
+ | | | ||
| | | | ||
|- | |- | ||
Line 388: | Line 536: | ||
|- | |- | ||
|[[File:MSP55LV128M_AGB-SD-E05.jpg|80px]] | |[[File:MSP55LV128M_AGB-SD-E05.jpg|80px]] | ||
− | + | |MSP55LV128M | |
|AGB-SD-E05 | |AGB-SD-E05 | ||
|16MB | |16MB | ||
Line 394: | Line 542: | ||
| | | | ||
|SRAM | |SRAM | ||
+ | |Yes** | ||
+ | |- | ||
+ | |[[File:MSP55LV100S.jpg|80px]] | ||
+ | |MSP55LV100S | ||
+ | | | ||
+ | |16MB | ||
+ | | | ||
| | | | ||
+ | |SRAM | ||
+ | |Yes** | ||
|- | |- | ||
|[[File:29GL128EHMC 1.jpg|80px]] | |[[File:29GL128EHMC 1.jpg|80px]] | ||
Line 414: | Line 571: | ||
|Yes* | |Yes* | ||
|- | |- | ||
− | + | |[[File:M29W128.jpg|80px]] | |
− | |[[M29W128| | + | |M29W128 |
| | | | ||
|16MB | |16MB | ||
Line 421: | Line 578: | ||
|BV128M | |BV128M | ||
|SRAM | |SRAM | ||
− | | | + | |Yes |
|- | |- | ||
| | | | ||
− | | | + | |MX29GL128ELT |
| | | | ||
|16MB | |16MB | ||
Line 433: | Line 590: | ||
|- | |- | ||
|[[File:S29gl128-1.jpg|80px]] | |[[File:S29gl128-1.jpg|80px]] | ||
− | + | |S29GL128 | |
|TSOP56 LJ5498 | |TSOP56 LJ5498 | ||
|16MB | |16MB | ||
Line 442: | Line 599: | ||
|- | |- | ||
|[[File:BX2006_0108_HD.jpg|80px]] | |[[File:BX2006_0108_HD.jpg|80px]] | ||
− | + | |S29GL128 | |
|BX2006_0108_HD AGB-E05-08 | |BX2006_0108_HD AGB-E05-08 | ||
|16MB | |16MB | ||
Line 459: | Line 616: | ||
|Yes | |Yes | ||
|- | |- | ||
− | |[[File: 36L0R.jpg |80px]] | + | |[[File:36L0R.jpg|80px]] |
|[[M36L0R705_36L0R|M36L0R705]] | |[[M36L0R705_36L0R|M36L0R705]] | ||
|36L0R | |36L0R | ||
Line 467: | Line 624: | ||
|SRAM | |SRAM | ||
|Yes | |Yes | ||
+ | |- | ||
+ | |[[File:36LOR8-39VF512.jpg|80px]] | ||
+ | |M36L0R806 | ||
+ | |36LOR8-39VF512 | ||
+ | |32MB | ||
+ | | | ||
+ | | | ||
+ | |Flash 512Kbit | ||
+ | |N/A | ||
|- | |- | ||
|[[File:GE28F128W30.jpg|80px]] | |[[File:GE28F128W30.jpg|80px]] | ||
Line 523: | Line 689: | ||
|- | |- | ||
| | | | ||
− | | | + | |4000L0YBQ0 |
| | | | ||
|32MB | |32MB | ||
Line 534: | Line 700: | ||
<nowiki>*</nowiki> Trace needs to be cut to enable battery. [[https://flashcartdb.com/index.php/File:Gba_battery_install_example.jpg Example]]: Cut blue, bridge yellow, and then solder the battery to the designated pads. | <nowiki>*</nowiki> Trace needs to be cut to enable battery. [[https://flashcartdb.com/index.php/File:Gba_battery_install_example.jpg Example]]: Cut blue, bridge yellow, and then solder the battery to the designated pads. | ||
+ | <nowiki>**</nowiki> Looks like it but hasn't been tested. | ||
− | ''' Clone carts (Older) ''' | + | ''' Clone/Repo carts (Older and likely unsupported) ''' |
{| class="wikitable" | {| class="wikitable" | ||
Line 557: | Line 724: | ||
|- | |- | ||
|[[File:TC551001BFL.jpg|80px]] | |[[File:TC551001BFL.jpg|80px]] | ||
− | | | + | |TC551001BFL |
| | | | ||
|16MB? | |16MB? | ||
Line 575: | Line 742: | ||
|- | |- | ||
|[[File:L05Y1 32M.jpg|80px]] | |[[File:L05Y1 32M.jpg|80px]] | ||
− | |[[ | + | |L05Y1_32M |
+ | | | ||
+ | |32MB? | ||
+ | | | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |- | ||
+ | |[[File:L05T-32M.jpg|80px]] | ||
+ | |L05T-32M | ||
| | | | ||
|32MB? | |32MB? | ||
Line 584: | Line 760: | ||
|- | |- | ||
|[[File:1284-N-64.jpg|80px]] | |[[File:1284-N-64.jpg|80px]] | ||
− | | | + | |1284-N-64 |
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |[[File:84VD22193EC-90.jpg|80px]] | ||
+ | |84VD22193EC | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |- | ||
+ | |[[File:SL073_A4A.jpg|80px]] | ||
+ | |SL073_A4A | ||
| | | | ||
| | | | ||
| | | | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |- | ||
+ | |[[File:TC55V1001.jpg|80px]] | ||
+ | | | ||
+ | | | ||
| | | | ||
| | | | ||
| | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |- | ||
+ | |[[File:M59PW1282.jpg|80px]] | ||
+ | |M59PW1282 | ||
+ | | | ||
+ | |8MB | ||
+ | | | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |- | ||
+ | |[[File:Unknown_1.jpg|80px]] | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |- | ||
+ | |[[File:Unknown_2.jpg|80px]] | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |- | ||
+ | |[[File:Unknown_5.jpg|80px]] | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |[[File:Unknown_3.jpg|80px]] | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
+ | |- | ||
+ | |[[File:AM29LV400BT.jpg|80px]] | ||
+ | |AM29LV400BT | ||
+ | | | ||
+ | |512KB | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |[[File:MX29LV320B.jpg|80px]] | ||
+ | |MX29LV320B | ||
+ | | | ||
+ | |4MB x 2 chips? | ||
+ | | | ||
+ | | | ||
+ | |SRAM | ||
+ | |Yes | ||
|} | |} | ||
. | . |
Revision as of 13:59, 24 March 2020
Contents
GameBoy Flash Carts (By vendor, current)
BennVenn
• BennVenn ElCheapoSD v2.2
Catskull
Dillon1337
• Homebrew Gameboy Cartridge (512KB MBC1)
EMS
EZ-Flash
• EZ-Flash Junior
Gekkio
• GB-LIVE32 (32KB)
• GB-CART32K-A (32KB)
• GB-CART256K-A (256KB)
insideGadgets
• insideGadgets 32KB, 4KB FRAM
• insideGadgets 1MB, 128KB SRAM Ultra Low Power
• insideGadgets 1MB, 128KB SRAM
• insideGadgets 4MB, 128KB SRAM Low Power
• insideGadgets 4MB, 128KB FRAM Low Power
• insideGadgets 64MB, 128KB SRAM
J.Rodrigo
• J.Rodrigo 2MB / 4 MB, 32KB FRAM
Kitsch-Bent
• KitschKart Multicart (BennVenn) 2MB
• kk_gb_256x16_plcc cartridge (32KB x 16 slots)
Krikzz
• Krikzz EverDrive-GB X3 / X5 / X7
MrHDR
• MBC30 4MB Flash Cart (MBM29F033C)
RetroStage
• GameBoy Blaster 4MB ROM, 32KB FRAM
• GameBoy Blaster 8MB ROM, 32KB FRAM
• GameBoy Blaster 1MB ROM, 128KB SRAM
?
• Jack DIY
• Flash BOY 4MB MBC5 Cart (HASL contacts, 3.3V Flash without level shifters, not recommended!)
GameBoy Flash Carts (By vendor, Discontinued)
BennVenn
• BennVenn Charlie 802 2MB / 4MB / 8MB, FRAM
• BennVenn ElCheapoSD V1.5/6
• BennVenn ElCheapoSD V1.95
• BennVenn USB LSDJ Cart v1.1
Catskull
insideGadgets
• insideGadgets 2MB, 128KB SRAM
• insideGadgets 2MB, 32KB FRAM
Nintendo
Professor Abrasive
• Professor Abrasive Drag'N'Derp 3MB, 128KB FRAM
?
• GB Smart 32M
GameBoy Clone/Repo Flash Carts
Some of these clone/repo carts don't support the MBC1 mapper properly, so some MBC1 games may work but others might not. You can manually patch the game to change it to be MBC5. Here is a listing of games and their MBC types: https://ladecadence.net/trastero/listado%20juegos%20gameboy.html
Check out the potential problems with some of these clone/repo carts
Can't find your cart in this list? Try an option close to it and let us know if it works!
Picture | Flash chip | PCB Text | Size | Re-flashable? | Save Type | Battery installed? | Notes |
AM29LV160 | 512KB | Yes | SRAM | Yes | Original game is 512KB, it seems locked to that, has MBC1 support. CPLD programming pins exposed. 0.3uA used for SRAM data retention. | ||
29LV320 | 1MB | SRAM | Yes | Original game is 1MB, may be locked to that?. CPLD programming pins exposed. | |||
ES29LV160 | 0883_DRV | 1MB | Yes | SRAM | Recommended 3.3V to erase/program. After installing a battery, change solder bridge from N to Y. | ||
ES29LV160 | 16BIT_0883_32M | 1MB | Yes | SRAM | Yes | Recommended 3.3V to erase/program. After installing a battery, change solder bridge from N to Y. | |
BV5 | SDOO/_BV5 | 2MB | Yes | SRAM | Yes | ||
M29W160EB | SD007_BV5_DRV | 2MB | Yes | SRAM | |||
ES29LV160FT | 2MB | Yes | SRAM | ||||
AM29LV160DB | LJ3843-2 | 2MB | Yes | SRAM | Yes | Recommended 3.3V to erase/program. | |
29LV160BTTC | 2MB | Yes | SRAM | Recommended 3.3V to erase/program. | |||
29LV160CTTC | 2MB | Yes | SRAM | Yes | Recommended 3.3V to erase/program. | ||
29LV160TE | GB-M900 | 2MB | Yes | SRAM | Yes | Recommended 3.3V to erase/program. | |
29LV160TE | GB-M900 | 2MB | Yes | SRAM | Yes | Recommended 3.3V to erase/program. | |
S29AL016M90 | GB-M900 | 2MB | Yes | SRAM | Recommended 3.3V to erase/program. | ||
S29GL016A90T | GD-TSOP-OPI | 2MB | Yes | SRAM | Recommended 3.3V to erase/program. | ||
29LV320 | GB-M968 | 4MB? | SRAM | ||||
M29W640 | SD007_48BALL-64M | 4MB | Yes | SRAM | Recommended 3.3V to erase/program. 19uA used for SRAM data retention, won't last long. | ||
M29W160ET | SD007_48BALL-64M_V2 | 4MB | Yes | SRAM | Yes | Recommended 3.3V to erase/program. | |
29DL32BF | 4MB | Yes | SRAM | Recommended 3.3V to erase/program. | |||
GL032A10 | SD007_48BALL-64M | 4MB | Yes | SRAM | Recommended 3.3V to erase/program. | ||
256M29 | SD008-6810-V3 | 32MB | Yes | SRAM | Yes | Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower. 4uA used for SRAM data retention. | |
M29W256 | SD008-6810-V3 | 32MB | Yes | SRAM | Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower. | ||
MX29GL256 | SD008-6810-V3 | 32MB | Yes | SRAM | Yes | Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower. |
Clone/Repo carts (Older)
Picture | Flash chip | PCB Text | Size | Re-flashable? | Save Type | Can Battery be fitted? | |
29LV004T | UC-32A06 | ||||||
? | KD053 | SRAM | Yes | ||||
? | SRAM | Yes | |||||
? |
Gameboy Advance Flash Carts (By vendor)
GBA games can use 3 different save types - SRAM, Flash or EEPROM and some cartridges aren't able to support all of these types.
Check out how to patch GBA games using GBATA
EZ-Flash
• EZ-Flash Omega
insideGadgets
• insideGadgets GBA 32MB, 256Kbit FRAM Save
• insideGadgets GBA 32MB, 4Kbit/64Kbit EEPROM Save
• insideGadgets GBA 32MB, 512Kbit Flash Save
• insideGadgets GBA 32MB, 1Mbit Flash Save
Krikzz
• Krikzz EverDrive-GBA X5
Misc
• Supercard Mini SD
• Flash2Advance
Gameboy Advance Clone/Repo Carts
Most clone/repo carts only come with SRAM, sometimes without a battery. If your game saves to an EEPROM or Flash then it won’t work on unless you patch it to use SRAM, the GBATA program seems to work well for this as reported by some users. If the cart you have doesn’t have a spot for a battery, then you will need to patch that game to save back to the flash. Check what save type your game uses here.
Check out how to patch GBA games using GBATA
Check out the potential problems with some of these clone/repo carts
Picture | Flash chip | PCB Text | Size | Re-flashable? | Save Type | Can Battery be fitted? | |
M29W640FB | BX2006 TSOPBGA 0106 | 8MB | M29W128 | SRAM (?) | No | ||
GD29GL064CAB-70G | BX2006 TSOPBGA 0106 | 8MB | SRAM | ||||
? | COB-15 SP | 8MB | 256L30B | ||||
MSP55LV128 | AGB-E05-01 | 16MB | MSP55LV128 | BV128M | SRAM | Yes | |
MSP55LV128M | AGB-E05-01 | 16MB | MSP55LV128M | BV128M | SRAM | Yes | |
MSP55LV128M | AGB-SD-E05 | 16MB | SRAM | Yes** | |||
MSP55LV100S | 16MB | SRAM | Yes** | ||||
29GL128EHMC | AGB-E08-09 | 16MB | 29GL128EHMC | BV128M | SRAM | Yes* | |
29LV128DTMC | AGB-E08-09 | 16MB | 29LV128DTMC | BV128M | SRAM | Yes* | |
M29W128 | 16MB | M29W128 | BV128M | SRAM | Yes | ||
MX29GL128ELT | 16MB | MX29GL128ELT | BV128M | SRAM | |||
S29GL128 | TSOP56 LJ5498 | 16MB | S29GL128 | BV128M | SRAM | Maybe? | |
S29GL128 | BX2006_0108_HD AGB-E05-08 | 16MB | S29GL128 | BV128M | SRAM | Yes | |
M36L0R706 | 36LOR-DRV | 16MB | M36L0R706 | BV128M | SRAM 1MBit | Yes | |
M36L0R705 | 36L0R | 16MB | M36L0R706 | 4400 | SRAM | Yes | |
M36L0R806 | 36LOR8-39VF512 | 32MB | Flash 512Kbit | N/A | |||
GE28F128W30 | GE28F128W30 | 16MB | GE28F128W30 | SRAM 1MBit | Yes | ||
MX29GL128FHT | TSOP56 | 16MB | S29GL128 | BV128M | SRAM | Yes* | |
256M29EWH | PC28F256M29EW | 32MB | MSP55LV128M | BV128M | SRAM | Yes | |
256L30B | 28F256L03B-DRV | 32MB | 256L30B | BV128M | SRAM | Yes | |
M29W256 | SD008-6810-V3 | 32MB | MSP55LV128M | BV128M | SRAM | Yes | |
4455LLZBQ0 | 4050/4455 39VF512 | 32MB | MSP55LV128M | BV128M | FLASH 512 | ||
4000L0YBQ0 | 32MB | MSP55LV128M | BV128M | SRAM |
* Trace needs to be cut to enable battery. [Example]: Cut blue, bridge yellow, and then solder the battery to the designated pads.
** Looks like it but hasn't been tested.
Clone/Repo carts (Older and likely unsupported)
.