Main Page

GameBoy Flash Carts (By vendor, current)

BennVenn

• BennVenn ElCheapoSD v2.2

Catskull

• Catskull 32KB

Dillon1337

• Homebrew Gameboy Cartridge (512KB MBC1)

EMS

• GB USB 64M Smart Card

EZ-Flash

• EZ-Flash Junior

Gekkio

• GB-LIVE32 (32KB)

• GB-CART32K-A (32KB)

• GB-CART256K-A (256KB)

insideGadgets

• insideGadgets 32KB

• insideGadgets 32KBx15

• insideGadgets 32KB FROM

• insideGadgets 32KB, 4KB FRAM

• insideGadgets 512KB Logic

• insideGadgets 1MB, 128KB SRAM Ultra Low Power with Custom Boot Logo and MBC1 locking

• insideGadgets 1MB, 128KB SRAM Power Cart (similar to the NPC)

• insideGadgets 1MB, 32KB FRAM Mini (fits in a GBA shell)

• insideGadgets 1MB, 128KB SRAM Mini (fits in a GBA shell)

• insideGadgets 4MB, 32KB FRAM Mini (fits in a GBA shell)

• insideGadgets 4MB MBC3 with RTC, 32KB FRAM

• insideGadgets 4MB, 128KB SRAM Low Power

• insideGadgets 4MB, 128KB FRAM Low Power

• insideGadgets LinkNLoad32 (4MB, 128KB FRAM)

• insideGadgets 64MB, 128KB SRAM

J.Rodrigo

• J.Rodrigo 2MB / 4 MB, 32KB FRAM

Kitsch-Bent

• KitschKart Multicart (BennVenn) 2MB

• kk_gb_256x16_plcc cartridge (32KB x 16 slots)

Krikzz

• Krikzz EverDrive-GB X3 / X5 / X7

HDR

• 4MB MBC30 with RTC, 32KB FRAM Flash Cart (MBM29F033C)

RetroStage

• GameBoy Blaster 4MB ROM, 32KB FRAM

• GameBoy Blaster 8MB ROM, 32KB FRAM

• GameBoy Blaster 1MB ROM, 128KB SRAM

SRPJ

4MB MBC5, 32KB SRAM Cart (3.3V Flash without level shifters)

 ?

• Jack DIY

• Flash BOY 2MB MBC5 Cart

• Flash BOY 4MB MBC5 Cart (HASL contacts, 3.3V Flash without level shifters, not recommended!)

GameBoy Flash Carts (By vendor, Discontinued)

BennVenn

• BennVenn 256M (32MB)

• BennVenn Charlie 802 2MB / 4MB / 8MB, FRAM

• BennVenn ElCheapoSD V1.5/6

• BennVenn ElCheapoSD V1.95

• BennVenn USB LSDJ Cart v1.1

BUNG

• BUNG Doctor GB Card 64M

Catskull

• Catskull 2MB MBC5

insideGadgets

• insideGadgets 1MB, 128KB SRAM

• insideGadgets 1MB, 128KB SRAM Custom Boot Logo

• insideGadgets 2MB, 128KB SRAM

• insideGadgets 2MB, 32KB FRAM

Nintendo

• Nintendo 1MB Power Cart

Professor Abrasive

• Professor Abrasive Drag'N'Derp 3MB, 128KB FRAM

 ?

• FIGHTERCART

• GB Smart 16M

• GB Smart 32M

GameBoy Clone/Repo Flash Carts

Some of these clone/repo carts don't support the MBC1 mapper properly, so some MBC1 games may work but others might not. You can manually patch the game to change it to be MBC5. Here is a listing of games and their MBC types: https://ladecadence.net/trastero/listado%20juegos%20gameboy.html

Check out the potential problems with some of these clone/repo carts

Can't find your cart in this list? Try an option close to it and let us know if it works!

Picture	Flash chip	PCB Text	Size	Re-flashable?	Save Type	Battery installed?	Notes
	AM29LV160		512KB	Yes	SRAM	Yes	Original game is 512KB, it seems locked to that, has MBC1 support. CPLD programming pins exposed. 0.3uA used for SRAM data retention.
	29LV320		1MB		SRAM	Yes	Original game is 1MB, may be locked to that?. CPLD programming pins exposed.
	ES29LV160	0883_DRV	1MB	Yes	SRAM		Recommended 3.3V to erase/program. After installing a battery, change solder bridge from N to Y.
	ES29LV160	16BIT_0883_32M	1MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program. After installing a battery, change solder bridge from N to Y.
	BV5	SDOO/_BV5	2MB	Yes	SRAM	Yes
	M29W160EB	SD007_BV5_DRV	2MB	Yes	SRAM
	29LV320	SD007_BV5_V2	4MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program. Use "4MB M29W640" option in GBxCart RW. 586nA used for SRAM data retention.
	26LV160	SD007_BV5_V3	2MB		SRAM	Yes
	ES29LV160FT		2MB	Yes	SRAM
	AM29LV160DB	LJ3843-2	2MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program.
	29LV160BTTC		2MB	Yes	SRAM		Recommended 3.3V to erase/program.
	29LV160CTTC		2MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program.
	29LV160TE	GB-M900	2MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program.
	29LV160TE	GB-M900	2MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program.
	S29AL016M90	GB-M900	2MB	Yes	SRAM		Recommended 3.3V to erase/program.
	S29GL016A90T	GD-TSOP-OPI	2MB	Yes	SRAM		Recommended 3.3V to erase/program.
	29LV320	GB-M968	4MB?		SRAM
	M29W160EB	GB-M968	2MB?	Yes	SRAM	Yes	Was able to flash using AM29LV160DB
	S29AL016	GB-M968	2MB?	Yes	SRAM		Battery can be installed
	M29W640	SD007_48BALL-64M	4MB	Yes	SRAM		Recommended 3.3V to erase/program. 19uA used for SRAM data retention, won't last long.
	GL032A10	SD007_48BALL-64M	4MB	Yes	SRAM		Recommended 3.3V to erase/program.
	M29W160ET	SD007_48BALL-64M_V2	4MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program.
	GL032	SD007_48BALL-64M_V3	4MB		SRAM		Probably works?
	36VF320	SD007_48BALL-64M_V5	4MB		SRAM		Probably works?
	29DL32BF		4MB	Yes	SRAM		Recommended 3.3V to erase/program.
	256M29	SD008-6810-V3	32MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower. 4uA used for SRAM data retention.
	M29W256	SD008-6810-V3	32MB	Yes	SRAM		Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower.
	MX29GL256	SD008-6810-V3	32MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower.
	MSP55LV100	SD008-3	32MB	Yes	SRAM	Yes	Recommended 3.3V to erase/program. Use "M29W256 / MX29GL256" option in GBxCart RW.

Clone/Repo carts (Older)

Picture	Flash chip	PCB Text	Size	Re-flashable?		Save Type	Can Battery be fitted?
	29LV004T	UC-32A06
	?	KD053				SRAM	Yes
	?	KD067 (sometimes)				SRAM	Yes
	?

Gameboy Advance Flash Carts (By vendor)

GBA games can use 3 different save types - SRAM, Flash or EEPROM and some cartridges aren't able to support all of these types.

Check out how to patch GBA games using GBATA

EZ-Flash

• EZ-Flash II

• EZ-Flash III

• EZ-Flash IV

• EZ-Flash Reform

• EZ-Flash Omega

insideGadgets

• insideGadgets GBA 32MB, 256Kbit FRAM Save

• insideGadgets GBA 32MB, 4Kbit/64Kbit EEPROM Save

• insideGadgets GBA 32MB, 512Kbit Flash Save

• insideGadgets GBA 32MB, 1Mbit Flash Save

Krikzz

• Krikzz EverDrive-GBA X5

• Krikzz EverDrive-GBA X5 Mini

Misc

• Supercard Mini SD

• Flash2Advance

Gameboy Advance Clone/Repo Carts

Be aware that some clone/repo carts aren't flashable. Most clone/repo carts only come with SRAM, sometimes without a battery. If your game saves to an EEPROM or Flash then it won’t work on unless you patch it to use SRAM, the GBATA program seems to work well for this as reported by some users. If the cart you have doesn’t have a spot for a battery, then you will need to patch that game to save back to the flash (there are no patching programs available for that). Check what save type your game uses here.

Check out how to patch GBA games using GBATA

Check out the potential problems with some of these clone/repo carts

Picture	Flash chip	PCB Text	Size	Re-flashable?		Save Type	Battery option?	Notes
	M29W640FB	BX2006 TSOPBGA 0106	8MB	M29W128		SRAM (?)	No
	GD29GL064CAB-70G	BX2006 TSOPBGA 0106	8MB			SRAM		Seems to write 0x0000 to 0xFFFF ok but not to 0x10000 to 0x1DFFF, unsure why. Not useable.
	?	COB-15 SP	8MB	256L30B
	MSP55LV128	AGB-E05-01	16MB	MSP55LV128	BV128M	SRAM	Yes
	MSP55LV128M	AGB-E05-01	16MB	MSP55LV128M	BV128M	SRAM	Yes
	MSP55LV128M	AGB-SD-E05	16MB			SRAM	Yes**
	MSP55LV100S		16MB			SRAM	Yes**
	29GL128EHMC	AGB-E08-09	16MB	29GL128EHMC	BV128M	SRAM	Yes*
	29LV128DTMC	AGB-E08-09	16MB	29LV128DTMC	BV128M	SRAM	Yes*
	M29W128		16MB	M29W128	BV128M	SRAM	Yes
	MX29GL128ELT		16MB	MX29GL128ELT	BV128M	SRAM
	MX29GL128FLT		16MB	MX29GL128ELT	BV128M	SRAM	Yes
	S29GL128	TSOP56 LJ5498	16MB	S29GL128	BV128M	SRAM	Maybe?
	S29GL128	BX2006_0108_HD AGB-E05-08	16MB	S29GL128	BV128M	SRAM	Yes
	M36L0R706	36LOR-DRV	16MB	M36L0R706	BV128M	SRAM 1MBit	Yes
	M36L0R705	36L0R	16MB	M36L0R706	4400	SRAM	Yes
	M36L0R705	4455_4400_4000_4350_36LOR_V3	16MB?	M36L0R706		SRAM (probably 1Mbit)	Yes
	M36L0R806	36LOR8-39VF512	32MB			Flash 512Kbit	N/A
	GE28F128W30	GE28F128W30	16MB	GE28F128W30		SRAM 1MBit	Yes
	MX29GL128FHT	TSOP56	16MB	S29GL128	BV128M	SRAM	Yes*
	256M29EWH	PC28F256M29EW	32MB	MSP55LV128M	BV128M	SRAM	Yes
	256L30B	28F256L03B-DRV	32MB	256L30B	BV128M	SRAM	Yes
	256L30B (no resistors)	28F256L03B-DRV	32MB	No		SRAM	Yes	Seems to erase but not program correctly
	M29W256	SD008-6810-V3	32MB	MSP55LV128M	BV128M	SRAM	Yes
	4455LLZBQ0	4050/4455 39VF512	32MB	MSP55LV128M	BV128M	FLASH 512
	4000L0YBQ0		32MB	MSP55LV128M	BV128M	SRAM
	6600			No				Seems to erase but not program correctly
	4050M			No				Seems to erase but not program correctly

* Trace needs to be cut to enable battery. [Example]: Cut blue, bridge yellow, and then solder the battery to the designated pads.

** Looks like it but hasn't been tested.

Clone/Repo carts (Older and likely unsupported)

Picture	Flash chip	PCB Text	Size	Re-flashable?		Save Type	Can Battery be fitted?
	TC551001BFL		16MB?			SRAM	Yes
	L05Y1_32M		32MB?			SRAM	Yes
	L05T-32M		32MB?			SRAM	Yes
	1284-N-64
	84VD22193EC					SRAM	Yes
	SL073_A4A					SRAM	Yes
						SRAM	Yes
	M59PW1282		8MB			SRAM	Yes
						SRAM	Yes
						SRAM	Yes
						SRAM	Yes
	AM29LV400BT		512KB
	MX29LV320B		4MB x 2 chips?			SRAM	Yes

.