Difference between revisions of "Main Page"

Revision as of 05:33, 10 October 2023

GameBoy Flash Carts (By vendor, current)

CUBIC STYLE

• 32KB Flash Cartridge

• GB 2MB Flash Cartridge ver.B

• GB Prosound Cartridge

Dillon1337

• Homebrew Gameboy Cartridge (512KB MBC1)

EMS

• GB USB 64M Smart Card

EZ-Flash

• EZ-Flash Junior

Gekkio

• GB-LIVE32 (32KB)

• GB-CART32K-A (32KB)

• GB-CART256K-A (256KB)

insideGadgets

• insideGadgets 32KB

• insideGadgets 24-Switch Puzzle Flash Cart (32KB)

• insideGadgets 32KBx15

• insideGadgets 32KB FROM

• insideGadgets 512KB, 32KB FRAM with Custom Boot Logo

• insideGadgets 1MB, 128KB SRAM Ultra Low Power with Custom Boot Logo and MBC1 support

• insideGadgets 1MB, 128KB SRAM Power Cart (similar to the NPC)

• insideGadgets 1MB, 32KB FRAM Mini (fits in a GBA shell)

• insideGadgets 1MB, 128KB SRAM Mini (fits in a GBA shell)

• insideGadgets 2MB, 32KB FRAM Ultra Low Power

• insideGadgets 2MB, 128KB SRAM Ultra Low Power

• insideGadgets 2MB MBC3 with RTC, 32KB FRAM

• insideGadgets 2MB MBC3 LinkNLoad with RTC 32KB FRAM

• insideGadgets 2MB Wisdom Tree Mapper Flash Cart

• insideGadgets 4MB (2x2MB chips), 32KB FRAM Ultra Low Power (optional rumble)

• insideGadgets 4MB, 32KB FRAM Mini (fits in a GBA shell)

• insideGadgets 4MB MBC3 with RTC+Rumble and 2x 2MB Mode, 32KB FRAM

• insideGadgets 4MB MBC3 with RTC, 32KB FRAM Mini (fits in a GBA shell)

• insideGadgets 4MB, 128KB FRAM Low Power (optional rumble)

• insideGadgets LinkNLoad32 (4MB, 128KB FRAM)

J.Rodrigo

• J.Rodrigo 2MB / 4 MB, 32KB FRAM

Kitsch-Bent

• KitschKart Multicart (BennVenn) 2MB

• kk_gb_256x16_plcc cartridge (32KB x 16 slots)

Krikzz

• Krikzz EverDrive-GB X3 / X5 / X7

HDR

• 2MB MBC3 with RTC, 32KB FRAM Flash Cart

• 4MB MBC30 with RTC, 32KB FRAM Flash Cart (MBM29F033C)

RetroStage

• GameBoy Blaster 1MB ROM, 128KB SRAM

• GameBoy Blaster 2MB ROM, 128KB SRAM

• GameBoy Blaster 4MB ROM, 32KB FRAM

• GameBoy Blaster 8MB ROM, 32KB FRAM

SRPJ

4MB MBC5, 32KB SRAM Cart (3.3V Flash without level shifters)

?

• Jack DIY

• Flash BOY 2MB MBC5 Cart

• Flash BOY 4MB MBC5 Cart (HASL contacts, 3.3V Flash without level shifters, not recommended!)

GameBoy Flash Carts (By vendor, Discontinued)

ASM Retro

• FIGHTERCART

BennVenn

• BennVenn 256M (32MB)

• BennVenn Charlie 802 2MB / 4MB / 8MB, FRAM

• BennVenn ElCheapoSD V1.5/6

• BennVenn ElCheapoSD V1.95

• BennVenn ElCheapoSD v2.2

• BennVenn USB LSDJ Cart v1.1

BUNG

• BUNG Doctor GB Card 64M

Catskull

• Catskull 32KB

• Catskull 2MB MBC5

CUBIC STYLE

• GB Flash Cartridge 2MB+32K / 2MB

EMS

• GB Smart 16M

• GB Smart 32M

insideGadgets

• insideGadgets 32KB, 4KB FRAM (superseded by the 512KB, 32KB FRAM cart)

• insideGadgets 512KB Logic

• insideGadgets 1MB, 128KB SRAM

• insideGadgets 1MB, 128KB SRAM Custom Boot Logo

• insideGadgets 2MB, 128KB SRAM

• insideGadgets 2MB, 32KB FRAM

• insideGadgets 2MB, 32KB FRAM Logic

• insideGadgets 4MB, 128KB SRAM Low Power

• insideGadgets 8MB/4MB, 32KB FRAM Low Power (optional rumble)

• insideGadgets 64MB, 128KB SRAM

Nintendo

• Nintendo 1MB Power Cart

• DMG-MBC5-32M-FLASH Development Cartridge, E201264

Professor Abrasive

• Professor Abrasive Drag'N'Derp 3MB, 128KB FRAM

GameBoy Clone/Repro Flash Carts

Some of these clone/repro carts don't support the MBC1 mapper properly, so some MBC1 games may work but others might not. You can manually patch the game to change it to be MBC5. Here is a listing of games and their MBC types: https://ladecadence.net/trastero/listado%20juegos%20gameboy.html

Most of these carts are only worth ~$5 and some of them can't hold a save for very long, it can depend which one you end up with.

Check out the potential problems with some of these clone/repro carts

Are you using GBxCart RW but can't write to the carts? Check out this section.

Can't find your cart in this list or don't want to open it up? Try the "Autodetect GB 3.3v option" and try re-seating the cart if you have issues.

Picture	Flash chip	PCB Text	Size	Re-flashable?	Save Type	Battery installed?	Notes
	AM29LV160		512KB		SRAM	Yes	Original game is 512KB, it seems locked to that, has MBC1 support. CPLD programming pins exposed. 0.3uA used for SRAM data retention.
	29LV320		1MB		SRAM	Yes	Original game is 1MB, may be locked to that?. CPLD programming pins exposed.
	ES29LV160	0883_DRV	1MB		SRAM		Recommended 3.3V to erase/program. After installing a battery, change solder bridge from N to Y.
	ES29LV160	16BIT_0883_32M	1MB		SRAM	Yes	Recommended 3.3V to erase/program. After installing a battery, change solder bridge from N to Y.
	BV5	SDOO/_BV5	2MB		SRAM	Yes
	M29W160EB	SD007_BV5_DRV	2MB		SRAM
	M29W160ET	SD007_TSOP_48BALL	2MB		SRAM	Yes	Recommended 3.3V to erase/program.
	M29W160ET	SD007_48BALL-64M_V2	2MB		SRAM	Yes	Recommended 3.3V to erase/program.
	29LV320	SD007_BV5_V2	4MB		SRAM	Yes	Recommended 3.3V to erase/program. Use "4MB M29W640" option in GBxCart RW. 586nA used for SRAM data retention.
	26LV160	SD007_BV5_V3	2MB		SRAM	Yes	Recommended 3.3V to erase/program. Use "4MB M29W640" option in GBxCart RW.
	29LV160	SD008_BV6_DRV	2MB		SRAM		Recommended 3.3V to erase/program. Use "2 MByte (AM29F016B) / 4 MByte (AM29F032B) (WR as WE)" option in GBxCart RW.
	ES29LV160FT		2MB		SRAM
	AM29LV160DB	LJ3843-2	2MB		SRAM	Yes	Recommended 3.3V to erase/program.
	29LV160BTTC		2MB		SRAM		Recommended 3.3V to erase/program.
	29LV160CTTC		2MB		SRAM	Yes	Recommended 3.3V to erase/program.
	29LV160TE	GB-M900	2MB		SRAM	Yes	Recommended 3.3V to erase/program.
	29LV160TE	GB-M900	2MB		SRAM	Yes	Recommended 3.3V to erase/program.
	S29AL016M90	GB-M900	2MB		SRAM		Recommended 3.3V to erase/program.
	S29GL016A90T	GD-TSOP-OPI	2MB		SRAM		Recommended 3.3V to erase/program.
	TC58FVT016F	SD007_T40_64BALL_TSOP28	2MB		SRAM		Recommended 3.3V to erase/program.
	29LV320	GB-M968	4MB?		SRAM
	M29W160EB	GB-M968	2 MB		SRAM	Yes**	Recommended 3.3V to erase/program. Use "AM29LV160DB" option. Supported by FlashGBX v0.7ß+
	S29AL016	GB-M968	2MB?		SRAM		Battery can be installed
	M29W640	321951S_Y19 180702 SD007_48BALL_64M	4MB		SRAM		Recommended 3.3V to erase/program. 19uA used for SRAM data retention, won't last long.
	M29W640	SD007_48BALL_64M	8 MB (4 MB usable)		SRAM	Yes	Recommended 3.3V to erase/program. Supported by FlashGBX v0.7ß+
	GL032A10	SD007_48BALL_64M	4MB		SRAM		Recommended 3.3V to erase/program.
	29DL32BF-70	SD007_48BALL_64M	4 MB (2 MB usable)		SRAM	Yes**	Recommended 3.3V to erase/program. Supported by FlashGBX v0.7ß+
	GL032M11BAIR4	SD007_48BALL_64M_V2	4 MB		SRAM	Yes	Recommended 3.3V to erase/program. Supported by FlashGBX v0.7ß+
	GL032	SD007_48BALL-64M_V3	4MB		SRAM		Probably works?
	29DL161TD-90	SD007_48BALL_64M_V3	2 MB		SRAM	Yes**	Recommended 3.3V to erase/program. Supported by FlashGBX v0.7ß+
	36VF3203	SD007_48BALL-64M_V5	4MB		SRAM		Recommended 3.3V to erase/program. Use "4MB M29W640" option in GBxCart RW. SRAM save battery life is terrible. Approx 1 month holding a save with brand new CR-2032.
	36VF3204	SD007_48BALL_64M_V5 or SD007_48BALL_64M_V6 or SD007_TSOP_48BALL	4 MB		SRAM	Yes	Recommended 3.3V to erase/program. Supported by FlashGBX v0.7ß+
	36VF3204		4 MB		SRAM		Recommended 3.3V to erase/program. Use 4 MByte (S29GL032 with CPLD) option
	29DL163BD	SD007_48BALL-64M_V5	2MB		SRAM		Recommended 3.3V to erase/program. Use "4MB M29W640" option in GBxCart RW. SRAM save battery life is terrible. Approx 1 month holding a save with brand new CR-2032. Supported by FlashGBX v0.7ß+
	29DL163BD	SD007_48BALL_64M_V6	2MB		SRAM		Recommended 3.3V to erase/program. Use "4MB M29W640" option in GBxCart RW. Supported by FlashGBX v0.7ß+
	A29L160HTV-70	SD007_48BALL_64M_V8	2MB		SRAM		Recommended 3.3V to erase/program
	GL032	SD007 TSOP 48BALL V10	4MB		SRAM		Recommended 3.3V to erase/program. Use chip erase. One user reported that they couldn't reflash it.
	29DL163BD	SD007_TSOP_48BALL	2MB		SRAM	Yes	Recommended 3.3V to erase/program.
	29DL32BF		4MB		SRAM		Recommended 3.3V to erase/program.
	29DL32TF-70	ES29LV160_DRV	4 MB (2 MB usable)		SRAM	Yes	Recommended 3.3V to erase/program. Supported by FlashGBX v0.7ß+
	S29GL032N90T	-	4 MB		SRAM	Yes**	Recommended 3.3V to erase/program. CPLD programming pins exposed. Supported by FlashGBX v0.7ß+
	M29W320	-	4 MB		SRAM	No
	S29GL032	-	4 MB		SRAM	No
	S29GL032	-	4 MB		SRAM	No
	?	2006_TSOP_64BALL_QFP48	2MB		SRAM	Yes	Recommended 3.3V to erase/program
	256M29	SD008-6810-V3	32MB		SRAM	Yes	Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower. 4uA used for SRAM data retention.
	M29W256	SD008-6810-V3	32MB		SRAM		Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower.
	MX29GL256	SD008-6810-V3	32MB		SRAM	Yes	Recommended 3.3V to erase/program. You need change the solder bridge from the top left to the one a little bit lower.
	?	SD008-6810-V5	32MB?		SRAM	Yes
	MSP55LV100	SD008-3	32MB		SRAM	Yes	Recommended 3.3V to erase/program. Use "M29W256 / MX29GL256" option in GBxCart RW.

Clone/Repro carts (Older)

Picture	Flash chip	PCB Text	Size	Re-flashable?	Save Type	Can Battery be fitted?

	29LV004T	UC-32A06
	?	KD053			SRAM	Yes
	?	KD067 (sometimes)			SRAM	Yes
	?
	TMS29F010B
		22182			SRAM	Yes
					SRAM	Yes
		BNZ8812B			Some sort of SRAM	Yes
	GAL16V8

GameBoy Advance Flash Carts (By vendor)

GBA games can use 3 different save types - SRAM, Flash or EEPROM and some cartridges aren't able to support all of these types.

Check out how to patch GBA games using GBATA

EZ-Flash

• EZ-Flash II

• EZ-Flash III

• EZ-Flash IV

• EZ-Flash Reform

• EZ-Flash Omega

• EZ-Flash Omega Definitive

insideGadgets

• insideGadgets GBA 2MB, 512Kbit Flash Save, Homebrew Flash Cart (Optional Solar+Rumble)

• insideGadgets GBA 16MB, 64K EEPROM, Solar+RTC Flash Cart

• insideGadgets GBA 32MB, 256Kbit FRAM Save with Rumble

• insideGadgets GBA 32MB, 4Kbit/64Kbit EEPROM Save

• insideGadgets GBA 32MB, 512Kbit Flash Save

• insideGadgets GBA 32MB, 1Mbit Flash Save

• insideGadgets GBA 32MB with RTC, 1Mbit Flash Save

• insideGadgets GBA 32MB/128MB, 1Mbit FRAM Multi-Game Cart

• insideGadgets GBA 3-in-1 32MB (x3) with RTC, 1Mbit Flash Save (3P switch)

Krikzz

• Krikzz EverDrive-GBA X5

• Krikzz EverDrive-GBA X5 Mini

Nintendo

• Nintendo Development AGB Cartridge 64M Flash S, E201843

• Nintendo Development AGB Cartridge 128M Flash S, E201850

• Nintendo Development AGB Cartridge 256M Flash S, E201868

RetroStage

• GBA Blaster 32MB ROM, 32KB FRAM

Misc

• Supercard Mini SD

• Flash2Advance Ultra 64M (with 2× 28F320C3B)

• Flash2Advance 128M (with 2× 28F640J3A120)

• Flash2Advance 256M (with 2× 28F128J3A150)

GameBoy Advance Clone/Repro Carts

Be aware that some clone/repro carts aren't flashable. Most clone/repro carts only come with SRAM, sometimes without a battery. If your game saves to an EEPROM or Flash then it won’t work on unless you patch it to use SRAM, the GBATA program seems to work well for this as reported by some users. If the cart you have doesn’t have a spot for a battery, then you will need to patch that game to save back to the flash (there are no patching programs available for that at this time). Check what save type your game uses here.

Most of these carts are only worth ~$5.

Check out how to patch GBA games using GBATA

Check out the potential problems with some of these clone/repro carts

Are you using GBxCart RW but can't write to the carts? Check out this section

Can't find your cart in this list or don't want to open it up? Try the "Autodetect GBA option" and try re-seating the cart if you have issues.

Picture	Flash chip	PCB text	Size	Re-flashable?	Save type	Battery option?	Notes
Picture	Flash chip	PCB text	Size		Save type	Battery option?	Notes
	M29W640FB	BX2006 TSOPBGA 0106	8MB		SRAM (?)	No
	GD29GL064CAB-70G	BX2006 TSOPBGA 0106	8MB		SRAM		Seems to write 0x0000 to 0xFFFF ok but not to 0x10000 to 0x1DFFF, unsure why. Not useable.
	?	COB-15 SP	8MB
	MSP55LV128	(I) (Nintendo^®) AGB-E05-01	16MB		SRAM	Yes	Supported by FlashGBX v0.7ß+
	MSP55LV128M	(I) (Nintendo^®) AGB-E05-01	16 MB		SRAM	Yes	Supported by FlashGBX v0.7ß+
	MSP55LV128T	AGB-E05-01	16MB		SRAM	Yes
	MSP55LV128T	1030-128	16MB			Yes	Flash chip on bottom side
	MSP55LV128M	AGB-SD-E05	16MB		SRAM	Yes**
	MSP55LV100S		16MB		SRAM	Yes**
	MSP55LVxx00		?
	29GL128EHMC	AGB-E08-09	16MB		SRAM	Yes*
	29LV128DTMC	AGB-E08-09	16MB		SRAM	Yes*
	29LV128DBT		16MB		SRAM	Yes*
	M29W128		16MB		SRAM	Yes
	MX29GL128ELT		16MB		SRAM
	MX29GL128ELT	AGB-E05-01	16MB		SRAM	Yes*
	MX29GL128FLT		16MB		SRAM	Yes
	S29GL128	TSOP56 LJ5498	16MB		SRAM	Maybe?
	S29GL128	BX2006_0108_HD AGB-E05-08	16MB		SRAM	Yes
	S29GL128	BX2006_TSCP_64BALL	16MB		SRAM 2Mb	Yes**	Need Solder Y Bridge
	S29GL128?	AGB-E05-02	16MB		SRAM	Maybe?
	GL128S11DHV02	BX2006_TSOP_64BALL © 2002 Nlhtehdo	16 MB		2M SRAM (512K usable)	Yes**	Supported by FlashGBX v0.7ß+
	GL128S90DHI02	AGB-E05-01 © 2002 Nlhtehdo	16 MB		1M SRAM	Yes**	Supported by FlashGBX v0.7ß+
	M36L0R706	36LOR-DRV	16MB		SRAM 1MBit	Yes
	M36L0R705	36L0R	16MB		SRAM	Yes
	M36L0R705	4455_4400_4000_4350_36LOR_V3	16MB?		SRAM (probably 1Mbit)	Yes
	M36L0R705	4455_4400_4000_4350_36LOR_V5	16MB?		SRAM (probably 1Mbit)	Yes
	?	4455_4400_4000_4350_36LOR_V5	16MB?		SRAM (probably 1Mbit?)	Yes
	M36L0R7050T	4455_4400_4000_4350_36L0R_V3 © 2002 Nlhlehde	16 MB		1M SRAM	Yes**	Supported by FlashGBX v0.7ß+
	M36L0R705	TSOP_4X_36_ATOO_V2	16 MB		1M SRAM	Yes**
	M36L0R8060B	36L0R8-39VF512 © 2002 Nlnlendo	32 MB		512K FLASH	No	Supported by FlashGBX v0.9ß+
	M36L0T8060T	4050_4400_4000_4350_36L0R_V5 © 2002 Nlhlehde	32 MB		2M SRAM (512K usable)	Yes**	Supported by FlashGBX v0.9ß+
	M36L0R8060T	36L0R8-39VF512 © 2002 Nlnlendo	32 MB		512K FLASH	No	Supported by FlashGBX v0.9ß+
	GE28F128W30	GE28F128W30	16MB		SRAM 1MBit	Yes
	MX29GL128FHT	TSOP56	16MB		SRAM	Yes*
	M29W128GH	AGB-E05-01	16MB		SRAM	Yes***
	GL256S10	BX2006_TSOP_64BALL	32MB		SRAM	Yes	Solder Y bridge for battery saves
	256M29EWH	PC28F256M29EW	32MB		SRAM	Yes
	256L30B	28F256L03B-DRV	32MB		SRAM	Yes
	256L30B (no resistors)	28F256L03B-DRV	32MB	No	SRAM	Yes	Seems to erase but not program correctly
	256L30B	28F256L03B-DRV	32 MB		1M SRAM	Yes**	Supported by FlashGBX v0.7ß+ Remove the DAN bridge if it’s soldered
	M29W256	SD008-6810-V3	32MB		SRAM	Yes
	4455LLZBQ0	4050/4455 39VF512	32MB		FLASH 512
	4000L0YBQ0		32MB		SRAM
	MSP54LV256	TSOP_MXP54X_AT00	32MB		SRAM	Yes
	6600M0U0BE	100BS6600_48BALL_V2	256MB (?)		SRAM (probably 2Mbit)	Yes**	Supported by FlashGBX 2.0+
	6600			No			Seems to erase but not program correctly
	4050M0Y0Q0	4050M0Y0Q0-39VF512	32 MB	–	512K FLASH		Supported by FlashGBX 2.0+
	4350LLYBQ2	2006_4XXX_6108	32 MB?		SRAM

* Trace needs to be cut to enable battery. [Example]: Cut blue, bridge yellow, and then solder the battery to the designated pads.

** Looks like it but hasn't been tested.

Clone/Repro carts (Older and likely unsupported)

Picture	Flash chip	PCB text	Size	Save type	Notes
Picture	Flash chip	PCB text	Size	Save type	Notes
	TC551001BFL		16MB?	SRAM	Yes

	L05Y1_32M		32MB?	SRAM	Yes
	L05T-32M		32MB?	SRAM	Yes
	1284-N-64
	84VD22193EC			SRAM	Yes
	SL073_A4A			SRAM	Yes
				SRAM	Yes
	M59PW1282		8MB	SRAM	Yes
				SRAM	Yes
				SRAM	Yes

				SRAM	Yes
	AM29LV400BT		512KB
	MX29LV320B		4MB x 2 chips?	SRAM	Yes
	192SJ3AM 52260226A	128SJ3 T3265		SRAM	Yes
		M6001-128		SRAM	Yes

.

Difference between revisions of "Main Page"

Revision as of 05:33, 10 October 2023

Contents

GameBoy Flash Carts (By vendor, current)

GameBoy Flash Carts (By vendor, Discontinued)

GameBoy Clone/Repro Flash Carts

GameBoy Advance Flash Carts (By vendor)

GameBoy Advance Clone/Repro Carts

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 3: / Line 3: @@
 ''' CUBIC STYLE '''
-• GB Flash Cartridge 2MB+32K / 2MB
+• 32KB Flash Cartridge
+• GB 2MB Flash Cartridge ver.B
-• 32KB Flash Cartridge
+• GB Prosound Cartridge
@@ Line 155: / Line 157: @@
 • Catskull 2MB MBC5 [[File:Gbxcart-v1.3-musb.jpg|20px|Flashable with GBxCart RW]] [[File:Altane.jpg|20px|Flashable with Altane]] [[File:J.Rodrigo Cart Flasher.JPG|20px|Flashable with J.Rodrigo Cart Flasher]]
+''' CUBIC STYLE '''
+• GB Flash Cartridge 2MB+32K / 2MB